ABOUT OUR PRODUCTS   Venting Requirements

1. EIKLOR FLAMES® gas logs systems must be installed in a 'Class A' fully-vented, solid-fuel burning fireplace constructed of noncombustible materials.
2. To prevent accidental closing of the fireplace chimney damper, the fireplace chimney damper must be: a) welded FULLY OPEN or b) completely removed or c) FULLY OPEN using a damper stop installed on the edge of your damper plate.
3. Your fireplace chimney must have a permanent vent opening to the atmosphere of not less than 54" square or round and must adhere to: noncombustible hearth extending minimum 16"; noncombustible lintel area extending minimum 12"; noncombustible materials extending minimum 6" on both sides of fireplace opening.
4. A fireplace screen or glass doors must be in place when the gas logs system is operating, and unless other provisions for combustion air are provided, the fireplace screen must have openings for introduction of combustion air. Keep your fireplace glass doors OPEN during operation and have your fireplace screen CLOSED during operation.

ALL EIKLOR FLAMES® GAS LOGS SYSTEMS MUST BE INSTALLED BY A LICENSED PLUMBER, LICENSED GAS FITTER, OR IN SOME LOCALITIES A QUALIFIED SERVICE TECHNICIAN, IN ACCORDANCE WITH ALL LOCAL, STATE, AND FEDERAL CODES.